This is the ultimate frame to set up your grill. The frames set up, the width of component, front supports, back supports, countertop support, and transition all of the weight to the ground, all in one step. Adjusting the width to accommodate any size grill is simple. Adding in the upper and lower support for a door set or drawer combo is already designed into the system. Because every component module uses the same installation methods for any manufacturer, it is easy to have quality results.
If your island contains a grill and door set or door/drawer combo then this is the complete kit needed to mount everything onto the universal frame rails. It contains two modules for the grill and door set. It also has additional framing for up to a 36" (or 42") wide grill, and the required materials to add both a door set and supports for a drawer.
This page is for information purposes only. Order at Build your own island section of the website.
Kit contains:
(2) accessory modules for Left and Right sides of the opening
(10) L brackets to connect to frame
(4) 36" or 42" (option) horizontal frame rails for above/below door set and below and behind grill. Note: All 4 rails will need to be cut to correct width of component opening of either grill or door set, whichever component is wider. All 4 are cut to same width and then opening is modified for difference with spacer material, also included.
(2) spacer blocks/drawer supports
(2) 22" door set filler upright rails. These correct for differences between the grill width cutout and the door set cutout.
(6) T brackets
(2) L brackets (flat)
(2) L brackets (hard 90)